-
Rotary Slip Ring
-
Capsule Slip Ring
-
Signal Slip Rings
-
High Frequency Slip Rings
-
Through Hole Slip Ring
-
Separate Slip Ring
-
Pancake Slip Ring
-
Fiber Optic Rotary Joint
-
High Current Slip Rings
-
Slip Ring Components
-
Non Mercury Slip Ring
-
Pneumatic Hydraulic Rotary Joints
-
Integrated Slip Ring
-
Slip Ring Solutions
-
WilliamJINPAT Slip ring appearance is good, packing carefully, service enthusiasm, need to come again
-
MartinFast delivery, good performance and good quality, looking forward to the next cooperation.
Through Hole Slip Ring
LPT series are through-bore slip rings (the center hole can pass through the drive shaft, gas-liquid passage; it can also integrate high frequency, fiber, encoder, waveguide, gas and liquid and other joints). The use of advanced fiber brush ensures reliable contact under extremely low friction. The center hole is available from 0 to 1000mm. The current is from mA to 5000 amps. The voltage can be up to 10000 volts, which can fully meet different needs of transmission.
Working Speed: : 0~300rp
Contact Material: : Precious Metal
Working Speed: : 0~300rp
Contact Material: : Precious Metal
Working Temperature: : -20~+60℃
Working Speed: : 0~300 RPM
Number Of Circuits: : 18
Working Speed: : 0~300 Rpm
ID: : 35mm
Working Speed: : 300rpm Max.
Number Of Circuits: : 11
Current Rating: : 9A Per Wire
Current Rating: : 2A/5A/10A/15A
Operating Speed: : 0-500rpm
Contact Material: : Precious Metal
Operating Speed: : 0-60rpm
Ring Current: : 12
Working Speed: : 0~300rpm
Number Of Circuits: : 6 Circuits
Current Rating: : 5A/10A/15A Each Circuit
Contact Material: : Precious Metal
Via Diameter: : 38.1mm
Rating Voltage: : 240VAC/DC
Dielectric Strength: : 1000VAC@50Hz