Payment & Shipping Terms:
|Operating Speed:||0-300rpm||Working Temperature:||-35℃~ +50℃|
|Voltage Rating:||240VAC/DC Or Higher||Current Rating:||10A /20Aper Circuit|
|Application:||Wind Turbine Generator||Electric Noise:||1mΩ Min|
Wind Turbine IP65 Slip Ring Commutator of 10 Poles with Carbon Brush for Wind Turbine Genertaor
This unit can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
It is also called a rotary electrical interface, commutator, collector, swivel or an electrical rotary joint. It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation.
This is constantly being extended in order to meet the development inofignal and data transmission.
JINPAT has developed a com-prehensile standard programmed that is able to offer optimum solutions.
The standard programmed enables the creation of slip ring bodies of any number of poles up to 100 for power and data/signal current. Slip ring bodies can be supplied either as open slip ring bodies to be built per customers‘ requirement or in a housing of impact-resistant plastic or sheet metal.
Wind turbine generator
|Working Temperature||-35℃~ +50℃|
|Working Humidity||60%RH or higher|
|Voltage Rating||240VAC/DC or higher|
|Current Rating||10A /20Aper circuit|
|Dielectric Strength||≥1000V@50Hz between each circuit|
|Insulation Resistance||1000MΩ@ 500VDC|
|Electrical Noise||1mΩ Min|
|Contact Material||Carbon Brush|
|Lead Wire Size||High-Temperature Resistant Material|
|Lead Wire Length||Standard 250mm(9.843inch)|
6, 12, 18 and 24 circuits models
Precision ball bearings for long life
5 amps rings
Precious metal contacts
Speed up to 500 rpm continuous
Rugged black anodized aluminum construction
Fully compatible with both analog and TTL control level signals
Compact design to fit in the most demanding space constraints
Low torque minimizes system torque budget
Unique signal handling performance with minimal electrical noise
JINPAT has 20 years experience in SLIP RING manufacturing. Our factory covers an area of 7000 square meters with professional R&D team, advanced production equipment, and 300 skillful employees. JINPAT slip ring is one of the best-known brands in Europe and North America.
It has advanced technical equipment with high precision test instruments. Our manpower is so competent that we meet the needs of different customers with various specifications in durability and a reliable quality.
Contact Person: sales