WilliamJINPAT Slip ring appearance is good, packing carefully, service enthusiasm, need to come again
MartinFast delivery, good performance and good quality, looking forward to the next cooperation.
Gold - Gold Contact Slip Ring 56 Circuits 240 VAC/DC Turnable Table Applied With A Flange
|Circuits Models||56 Circuits||Available Circuits||6, 12, 18, 24, 36, 56 Circuit Models|
|Current Rating||2 Amps Per Circuit||Voltage||240 VAC/DC|
|Contact Material||Gold To Gold||Operating Speed||300 Rpm|
rotating slip ring,
rotary joint slip ring
Gold - Gold Contact Slip Ring of 56 Circuits With a Flange for Turnable Table
Model LPC-56A is a 56-circuit, low-cost, off-the-shelf, and "one-size-fits-all" slip ring to most low-voltage applications, especially turntable.It provides smoother running, lower torque and lower electrical noise than competitive slip rings. It is available in 6, 12, 18, 24, 36, 56 circuit models.
The LPC-56A capsule slip ring Using a 90° V-groove ring design for each ring is a standard, off-the-shelf unit that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
The gold-gold technology used between rings and brushes, minimize noise and interferences between the rings, allowing high data rate.This unit can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, commutator, collector, swivel or an electrical rotary joint.
|Operating Speed||0-300 rpm|
|Number of Circuits||56|
|Current Rating||2 amps per circuit|
|Temperature Range||-20℃ to +60℃|
|Contact Material||Gold to Gold|
|Lead Size||28# silver plated copper|
|Lead Length||Standard 250 mm (9.843inch)|
|Dielectric Strength||≥500 VAC @50Hz, between each circuit|
|Insulation Resistance||100 MΩ @ 500 VDC|
|Electrical Noise||1mΩ Min|
56 circuits models
2 amps per circuit, 240VAC/DC
Speed up to 300 rpm continuous
Compatible with data bus protocols
Sealed units are available
Flexible, color-coded, silver-plated, lead wires
Transfers analog and digital signals
Precision ball bearings, sealed and lubricated for life
Environmental protection designed to meet IP65 requirements
Also available with 5 and 10 amps power rings combined with 2 amps rings.
Rugged structure and enclosure using corrosion-resistant materials and coatings
Reliable electrical interface including custom connectorisation
Low torque minimize system torque budget
Compact design to fit into the most demanding space.
Smooth running Low electrical noise
Fibre brush technology enables a maintenance-free slip ring design
Ability to achieve remarkable life without lubrication over a wide
High bandwidth transfer capability
Addition of special components
Quick shipment per your urgent requirement
Electrical test equipment
Manufacturing and process control equipment
Shuttle System, Sorter
Automated Guided Vehicles
Compressed Air And Electric Supply System
Robotics, rotary sensors, urgent illumination equipment
Overhead Crane, Process Crane
STS Container Crane
CCTV pan / tilt camera mounts
RTG/RMG Container Crane
Aviation, military, instrument, medical equipment.
Mini-type wire-rolling machine
The operating life of the unit depends upon temperature, rotation speed, and environment.
The operating life ≥50,000,000 runs ref.
Application Picture (Sorter Slip Ring )
JINPAT has 20 years experience in SLIP RING manufacturing. Our factory covers an area of 7000 square meters with professional R&D team, advanced production equipment, and 300 skillful employees. JINPAT slip ring is one of the best-known brands in Europe and North America.
It has advanced technical equipment with high precision test instruments. Our manpower is so competent that we meet the needs of different customers with various specifications in durability and a reliable quality.