Modern rotating equipment often needs to transmit multiple types of electrical, communication, video, and control signals through a limited rotary interface.
A standard slip ring may not be suitable when a system requires different signal types, customized connectors, and specific environmental requirements.
The LPC-D37-45S-03SD2-01E3-IP54 is a fully customized slip ring developed for complex rotary transmission applications.
The solution integrates 13 signal groups, including Gigabit Ethernet and 3G-SDI, while allowing the electrical and mechanical configuration to be adapted to the equipment.
One of the main advantages of a customized slip ring is the ability to integrate different signal types into a single rotary transmission system.
Depending on application requirements, the configuration can support:
- Gigabit Ethernet
- 3G-SDI
- USB 3.0
- Fiber optic signals
- RF coaxial signals
- Power and control signals
For high-speed signals, targeted impedance matching and crosstalk shielding can be incorporated into the design.
The LPC-D37-45S-03SD2-01E3-IP54 uses a fully non-standard design.
Specialized components can be selected according to the installation and operating requirements, including:
- Heat-shrink tubing
- Braided shielding
- Connectors
- Terminals
- Application-specific materials
This allows the slip ring to be adapted to compact and complex rotating mechanisms.
Different systems may require completely different electrical configurations.
JINPAT can customize circuits for both relatively high-current transmission and sensitive low-level signals.
Design considerations can include:
- Current and voltage requirements
- Insulation resistance
- Dielectric strength
- Signal impedance
- Crosstalk control
- Connector configuration
The product features IP54 protection, making it suitable for equipment requiring protection against dust and water splashing.
For specialized applications, mechanical structures can also be customized according to environmental requirements such as vibration, vacuum, or other demanding operating conditions.
The LPC-D37-45S-03SD2-01E3-IP54 can be used in:
- Pan-tilt platforms
- Optical and imaging equipment
- Industrial vision systems
- Rotating monitoring equipment
- Robotics and automation
- Specialized industrial machinery
- ✔ 13 signal groups
- ✔ Gigabit Ethernet + 3G-SDI
- ✔ Support for multiple special signal types
- ✔ Customized impedance and crosstalk control
- ✔ Specialized materials and connectors
- ✔ IP54 protection
- ✔ Fully non-standard design
The LPC-D37-45S-03SD2-01E3-IP54 provides a flexible rotary transmission solution for equipment that requires multiple electrical, communication, and video signals.
Its customized architecture makes it particularly suitable for rotating platforms, imaging equipment, and complex industrial systems where standard slip rings cannot meet the required configuration.