As a common high-speed signal in the slip ring industry, Ethernet signals can be transmitted almost losslessly in hollow shaft slip rings with a maximum aperture of 300mm. However, this technology is unique to JINPAT Electronics. As for other domestic slip ring manufacturers, they may not be able to achieve such technical capabilities. However, the aperture of 300mm is only for 100M Ethernet signals. The range of apertures for lossless transmission of Gigabit Ethernet signals is smaller. Currently, it supports transmission in slip rings with a maximum aperture of 180mm.
JINPAT Electronics has recently launched a new hollow shaft Ethernet signal integrated slip ring with a hole of more than 100mm. The hole diameter ranges from 110 to 140mm. The models are arranged in order from large to small hole diameters: LPT140-1405-05E3, LPT130 -0812-08S-E2-02E3, LPT124-0410-0306-01E2, LPT110-0715-1002-E2, LPT100-0610-01E2.
Among these new through-hole slip rings from JEPAT, the LPT140-1405-05E3 has the strongest signal transmission capability because it integrates 5 Gigabit Ethernet signal paths. Since its operating voltage is only 130VAC, and its power loop part only supports 5A current per channel, the power transmission capability of this product is relatively weak among these several products. In addition to the special electrical and signal transmission performance, JEPAT LPT140-1405-05E3 is also a product with outstanding protection level. It can reach IP54 when installed vertically, and it is also a product with outstanding performance.