WilliamJINPAT Slip ring appearance is good, packing carefully, service enthusiasm, need to come again
MartinFast delivery, good performance and good quality, looking forward to the next cooperation.
0.1N.m Low Torque Slip Ring 2 Channels Pneumatic Rotary Joint Routing Compressed Air
|Channel||2 Channels||Working Pressure||0~0.6 MPa|
|Connection Caliber||M5||Pipe Diameter||φ 4|
|Torque||0.1 N.m||Application||Crimping Machine|
electrical slip rings industrial,
hollow slip ring,
0.6MPa Low Torque Slip Ring
0.1N.m Low Torque Slip Ring of 2 Channels Pneumatic Rotary Joint Routing Compressed Air
The LPP004-02A pneumatic rotary joint can transmit compressed air. Such a rotary joint can also integrate with electrical part, coax rotary joint and fiber optic rotary joint. The integrated unit can provide a solution for simultaneous transmission of power, signal, and gas/liquid in rotary automation equipment to meet more challenges. Diversified figure is optional, and it can also transfer gas, oil and liquid under different pressure. Also, the design of structure and selection of sealant are in line with the transmitted media and the practical pressure. Excellent performance, therefore, is achieved.
- 2 channels
- Working Pressure:0~0.6MPa
- Media: Compressed Air
- Connection Caliber: M5
- Working Torque: 0.1N.m
- Pipe Diameter: φ4mm
- Crimping machine
- Converter equipment
- Textile Machinery
- Plastic blow molding equipment
- Chemical equipment
- Carton equipment
- Plastic stretch film machine
- Specific Scroll devices
JINPAT has 20 years experience in SLIP RING manufacturing. Our factory covers an area of 7000 square meters with professional R&D team, advanced production equipment, and 300 skillful employees. JINPAT slip ring is one of the best-known brands in Europe and North America.
Typical products like Capsule Slip Ring, Through-bore Slip Ring, Large-current Slip Ring, High Frequency Slip Ring, Fiber Optic Slip Ring, Separate Slip Ring, Pin Slip Ring are off-the shelf units. Besides of these, customization is supported to cater to different application in that electrical rotary joints can be designed exclusively for Ethernet, USB, HDMI, Sensor, CAN bus, Thermocouple, RS232, RS422 and so forth.