JINPAT 4-Channel High Frequency Rotary Joint Breakthrough

After years of painstaking research and development, JINPAT Electronics has mastered the development technology of 1~4 channel high frequency rotary joint.

The 4-channel high-frequency rotary joint is an important technological breakthrough for JINPAT Electronics in 2020. Compared with imported products of the same model, JINPAT high frequency rotary joint has a smaller volume. After various tests in the JINPAT laboratory, actual use shows that the high-frequency rotary joint produced by JINPAT has a longer life than imported high-frequency rotary joints and has better RF performance. The main advantages are as follows:
 Compact structure, OD only 41mm
 Easy to integrate with small size through-hole electric rotary joint
 4-channel DC-4GHz, VSWR <1.5, insertion loss <1.0dB
 Working life> 5 million revolutions, with high reliability

If you have other channel or frequency requirements, JINPAT can also provide other options. Our single-channel working frequency band supports a minimum of 3GHz and a maximum of 40 GHz. The maximum peak power of a single-channel high-frequency rotary joint can reach 10,000W. JINPAT dual-channel working frequency band supports at least two channels of 4.5 GHz and up to two channels of 18 GHz. There are models with two different frequency band combinations of 13 GHz and 18 GHz. Our 3-channel high-frequency rotary joint only supports 3 channels of 3GHz high-frequency signal transmission, and the power of each channel is up to 3000W.