-
WilliamJINPAT Slip ring appearance is good, packing carefully, service enthusiasm, need to come again
-
MartinFast delivery, good performance and good quality, looking forward to the next cooperation.
Wind Power Equipment Through Hole Slip Ring 24 Circuit 10A 300rpm Aluminum Alloy
Contact Material | Precious Metal | Via Diameter | 50mm |
---|---|---|---|
Ring Current | 24 Circuit 10A | ||
High Light | hollow shaft slip ring,through bore electrical slip ring |
We JINPAT cable reel slip ring LPT series suit for the application of crane. Like the slip rings LPT025/LPT038/LPT050 and so on.
LPT050-2410 hallow shalft slip ring features 24 circuits and 10 A per circuit. It uses our fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force per fiber and low contact wear rates.In addition, fiber brushes do not require lubrication and produce virtually no wear debris. The LPT050 features field serviceable brush blocks.
Specification | |
Circuits | 1-24 circuits |
Operating Speed | 0-300rpm |
Working Temperature | -20℃~ +60℃ |
Working Humidity | 60%RH or higher |
Electrical: | |
Voltage Rating | 240VAC/DC or higher |
Current Rating | 2A/5A/10A/15A per circuit |
Dielectric Strength | ≥1000V@50Hz between each circuit |
Insulation Resistance | 50MΩ@ 500VDC |
Electrical Noise | 30mΩ Min |
Mechanical: | |
Contact Material | Precious metal |
Lead Wire Length | Standard 300mm (11.811inch) |
Housing Material | Aluminum alloy |
Torque | ≤9.25 g·m (for reference ) |
Protection | IP44 or higher |
Features
- Transfer analog and data signals
- Compatible with data bus protocols
- Long life, maintenance free
- Easy installation
- 360° continuous rotation for transmission of power and data signals
typical application
- Military equipment
- Medical equipment
- Wind power equipment
- Manufacturing and control equipment
- Exhibition / display equipment
- Robot, radar antenna
- Magnetic actuator, rotary sensor
- Construction machinery, test equipment, packaging machinery, etc.
Optional
- Inner diameter, outer diameter, length
- Working speed
- Number of ways
- Current and voltage
- Wire length, connection terminal
- Housing material and color
- Protection level
- Signal and power can be transmitted separately or in combination
Product outline drawing
Advantages
1. What do we do?
We focus on developing, designing, manufacturing high quality sliprings, and offer various solutions for rotating systems.
2. How long have we been in the business?
Jinpat established slip rings business since 1996. We have thousands of customers accepted our products or services.
3. What is a slip ring?
A slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. A slip ring can be used in any electromechanical system that requires rotation while transmitting power or signals. It can improve mechanical performance, simplify system operation and eliminate damage-prone wires dangling from movable joints.
4. How do I choose a slip ring?
Proper selection of a slip ring solution requires details about your application’s operating parameters including total circuits, voltage and amps per circuit, operating speed, and mounting type. A good place to start your search is with our standard slip rings. If you are confident that a custom / modified solution is most likely required or need assistance in your selection, contact us to Get Started.
5. Do you offer custom slip rings?
Yes, if you are confident that a custom / modified solution is most likely required or need assistance in your selection, contact us to Get Started. Our engineers will come up with perfect solution for your needs.