-
Rotary Slip Ring
-
Capsule Slip Ring
-
Signal Slip Rings
-
Fiber Optic Rotary Joint
-
High Frequency Slip Rings
-
Through Hole Slip Ring
-
Separate Slip Ring
-
Pancake Slip Ring
-
High Current Slip Rings
-
Slip Ring Components
-
Non Mercury Slip Ring
-
Pneumatic Hydraulic Rotary Joints
-
Integrated Slip Ring
-
Slip Ring Solutions
-
WilliamJINPAT Slip ring appearance is good, packing carefully, service enthusiasm, need to come again -
MartinFast delivery, good performance and good quality, looking forward to the next cooperation.
Through Hole Slip Ring
LPT series are through-bore slip rings (the center hole can pass through the drive shaft, gas-liquid passage; it can also integrate high frequency, fiber, encoder, waveguide, gas and liquid and other joints). The use of advanced fiber brush ensures reliable contact under extremely low friction. The center hole is available from 0 to 1000mm. The current is from mA to 5000 amps. The voltage can be up to 10000 volts, which can fully meet different needs of transmission.
Current Rating: : 5A Per Circuit
Inner Size: : 12.7mm
Working Speed: : 0~300rp
Contact Material: : Precious Metal
Circuits: : 6
Current Per Circuit: : 5A
Operating Speed: : 0-300rpm
Working Temperature: : -20~ +60
Detail: : 6X2A
Dielectric Strength: : 500VAC@50Hz
Contact Material: : Gold-Gold
Inner Diameter: : Φ12.7mm
Operating Speed: : 0-20 Rpm
Insulation Resistance: : ≥500MΩ@500VDC(Power);≥100MΩ@100VDC(Signal)
Circuit Number: : 19
Current Rating: : 30A
Current Rating: : 10A
Voltage: : 240VAC
Wire Count: : 12 Wires
Current Capacity: : 15A
Ring Current: : 12
Working Speed: : 0~300rpm
Operating Speed: : 0-300rpm
Number Of Circuits: : 6/12/18/24

